REPORT Y9020025 LINE-SIZE 130.  "Release 3.1G, 4.5A
************************************************************************
* Copyright (c) 1999 by CT-Team, 33415 Verl, http://www.ct-software.com
*
*     You can use or modify this report for your own work as long
*               as you don't try to sell or republish it.
*      In no event will the author be liable for indirect, special,
*        Incidental, or consequental damages (if any) arising out of
*                       the use of this report.
*
************************************************************************
 BREAK-POINT.
*//////////////////////////////////////////////////////////////////////*
 MOVE: 'TESTREPORT for    "ASSIGN  PFeld+o(l)  TO  <fs1>"        '
        TO SY-TITLE.
*//////////////////////////////////////////////////////////////////////*
***************       Declaration of variables    **********************
 FIELD-SYMBOLS <FS1>.
*.......................................................................
 DATA: PFELD4(4)   TYPE P VALUE '1022333'.
 DATA: PFELDX(4)   TYPE P VALUE '7777777'.
 DATA: PFELD6(6)   TYPE P VALUE '21244' DECIMALS 2.
 DATA: PFELD8(8)   TYPE P VALUE '7333213' DECIMALS 4.
 DATA: CFELD8(8)   TYPE C VALUE 'AAAAAAAA'.
*
 DATA: OFFX    TYPE I VALUE 8.
 DATA: LENX    TYPE I VALUE 8.
*//////////////////////////////////////////////////////////////////////*
*************               Main Section             *******************
*//////////////////////////////////////////////////////////////////////*
*
    WRITE: /5  'Example 1,  *** Inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible  ASSIGN: ''ASSIGN PFELD4+1(3) TO <FS1>'' '.
*   ASSIGN PFELD4+1(3) TO <FS1>.
    ULINE. SKIP 2.
************************************************************************
*
    BREAK-POINT.
    WRITE: / 'ASSIGN command with PFELD4, but PFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-PFELD USING PFELD4 'PFELD4'.
    WRITE: /10 'Content of   PFELDX      :', PFELDX.
    ULINE. SKIP 2.
*-----------------------------------------------------------------------
 ASSIGN PFELD4+8(4) TO <FS1>.
************************************************************************
*
    BREAK-POINT.
    WRITE: / 'ASSIGN with PFELD4, but PFELD6 is also partly affected !'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   PFELD6      :', PFELD6.
    PERFORM DISPLAY-PFELD USING PFELD4 'PFELD4'.
    WRITE: /10 'Content of   PFELD6      :', PFELD6.
    ULINE. SKIP 2.
*-----------------------------------------------------------------------
 ASSIGN PFELD6 TO <FS1>.
************************************************************************
*
    BREAK-POINT.
    WRITE: / 'ASSIGN command with PFELD6' COLOR 3.
    WRITE: /5 'Example 4'.
    ULINE. SKIP 2.
    PERFORM DISPLAY-PFELD USING PFELD6 'PFELD6'.
*-----------------------------------------------------------------------
 ASSIGN PFELD8+OFFX(LENX) TO <FS1>.
************************************************************************
*
    BREAK-POINT.
    SKIP 2.
    WRITE: / 'ASSIGN command with PFELD8 but CFELD8 is affected'
              COLOR 3.
    WRITE: /5 'Example 5'.
    WRITE: /10 'Content of   CFELD8      :', CFELD8.
    PERFORM DISPLAY-PFELD USING PFELD8 'PFELD8'.
    WRITE: /10 'Content of   CFELD8      :', CFELD8.
    ULINE. SKIP 2.
*.......................................................................
*
*//////////////////////////////////////////////////////////////////////*
*************                Subroutines             *******************
*//////////////////////////////////////////////////////////////////////*
*
************************************************************************
*            Display of data fields and field symbols                  *
************************************************************************
 FORM DISPLAY-PFELD USING PFELD FNAME.
*
 WRITE: /10 'Content of', FNAME, ':', PFELD.
 PERFORM FELDEIGENSCHAFTEN USING PFELD.
*
 WRITE: /10 'Content of <FS1> :', <FS1>.
 PERFORM FELDEIGENSCHAFTEN USING <FS1>.
*-----------------------------------------------------------------------
 ADD   111    TO <FS1>.               "<-- The field symbol will be used
*-----------------------------------------------------------------------
 WRITE: /10 'ADD 111 TO <FS1>'.
 ULINE.
*.......................................................................
 WRITE: /10 'Content of', FNAME, 35 ':', PFELD.
 WRITE: /10 'Content of <FS1>',  35 ':', <FS1>.
*.......................................................................
 ENDFORM.
************************************************************************
*    Determination of field properties (only for information)          *
************************************************************************
 FORM FELDEIGENSCHAFTEN USING ALLG.
*
 DATA: FLAENGE(2) TYPE N.
 DATA: FTYP(1) TYPE C.
 DATA: FOUT(2) TYPE N.
 DATA: FDEZ(2) TYPE N.
*.......................................................................
  ULINE.
  DESCRIBE FIELD ALLG LENGTH FLAENGE.
  WRITE: /10 'Field length  :', FLAENGE.
*
  DESCRIBE FIELD ALLG TYPE FTYP.
  WRITE: /10 'Field type    :', FTYP.
*
  DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
  WRITE: /10 'Output length :', FOUT.
*
  DESCRIBE FIELD ALLG DECIMALS FDEZ.
  WRITE: /10 'Decimals      :', FDEZ.
  SKIP 1.
*.......................................................................
 ENDFORM.
************************************************************************
************************************************************************
******************* END OF PROGRAM *************************************